Before You Buy
uGW800 miner
GPS Antenna
LoRa Antenna
12V-DC power adapter (according to the frequency band to adapt to US or European regulations)
SIM card pin.
- Why choosefrequency?
If you select an inappropriate frequency to set up, your hotspot will not work properly. Helium’s LoRaWAN Network is built up 8-channel gateways. It is important to confirm the appropriate frequencies for gateway configuration for each country.
- uGW800supports frequency
US915 EU868 (AS923)
- What frequency should I choose?
Helium’s LoRaWAN Network is built up 8-channel gateways. It is important to confirm the appropriate frequencies for gateway configuration for each country.
Please refer to the following link to check the appropriate frequency for your region:
Model | uGW800 |
LoRa Specifications | |
LoRa Bands | US915, AS923/EU868 |
LoRa Baseband and RF | SX1303+SX1250*2(8channels uplink+1 channel downlink) |
Platform Configurations | |
CPU | Quad core Cortex-A35 64bits@1.5GHz |
RAM | 2GB LPDDR3 |
FLASH | 64GB eMMC |
WI-FI | IEEE802.11 b/g/n 2.4G |
BT | BT2.1/BT3.0/BT4.2 dual mode |
GNSS | GPS/Beidou |
Connectors | |
Antenna Port | SMA x3 (SubGHz LoRa, GNSS, Ext.) |
Power Supply | Type-C/DC-12V |
RJ45 Socket | Ethernet Connection |
Button | Configuration Button |
LED | Colorful LED（for system status） |
Physical Description | |
Casing | Nylon 6 &fiberglass |
Size | 146mm*123mm*40mm |
Enclosure (Optional) | FRP antenna (700mm), wall installation kit |
Security | ATECC608 |
Water proof | IP65 |
Environment | |
Storage Temperature | -20-60℃ |
Relative Humidity | 20%-75%, non-condensing |
FCC certification
This device has passed FCC certification, certification number: 2A6UH-UGW800PUC
This device complies with Part 15 of the FCC Rules. The operation must meet the following two conditions.
(1) This device must not cause harmful interference
(2) This device must accept any interference received, including interference that may cause unknown operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: According to Part 15 of the FCC Rules, this equipment has been tested and found to comply with the limits for a Class B digital device. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment could generate and radiate radio frequency energy, if not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning it off and on.
User is encouraged to correct the interference by one or more of the following measures:
- Adjust the position or reorient the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which receiver is connected.
- The connected circuit.
- Ask the dealer or an experienced radio/TV technician for help.
This device complies with the FCC regulations for radiation exposure in an uncontrolled environment. When installing and operating this equipment, maintain a distance of at least 20cm between the radiator and the body.